High-country-tek MVP-F Series Instrukcja Użytkownika Pobierz pdf (Strona 5)

021-MVP-F Rev A MVP-F User Manual 5

MVP-F Closed-loop Controller

MVP-F Controller

The MVP-F controller drives proportional solenoid valves in a closed loop system to follow a command signal.

When the feedback is greater than the command input, the coil receives full current; when the feedback is less than

the command input, the coil receives no current.

Once configured, the settings are permanently stored in the controller memory.

MVP-F Features

 Easily configured using HCT Graphical User Interface (GUI) or HCT Hand Held Interface (HHI)and prewired

18AWG PVC cable

 LED indicators for power, output current and fault status

 Permanently sealed, standard DIN 43650 Form A connector body

 Multiple modes for open loop, closed loop and inverted

 Single coil applications, feedback input only for closed-loop applications

 All input and output limits are independently adjustable

 Adjustable output with short circuit protection, fully adjustable PID control loop

 User configurable over and under limit handling

Operating Specifications

Supply Voltage

9 to 28VDC

Supply Current

Valve current + 20mA (Quiescent Max)

Output Current

-06A: 600mA MAX

-12A: 1.2A MAX

-25A: 2.5A MAX

Coil Resistance



Reference Voltages

+5V @ 2mA

Dither Frequency

50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 350, 400, 500, 1000Hz

Analog Input Range

-F1V: 0 to 10V

-F2A: 4 to 20mA

Analog Input Impedance

-F1V: 12K

-F2A: 250

Operating Temperature Range

-20º to 70º C (operating); -40º to 85º C (storage)

Enclosure

Glass filled Nylon

Dimensions

Inch: 2.4 L x 1.2 W x 0.75 H; Mm: 60 L x 30 W x 19 H

1 2 3 4 5 6 7 8 9 10 ... 16 17

Komentarze do niniejszej Instrukcji

Brak uwag

High-country-tek MVP-F Series Instrukcja Użytkownika Strona 5

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Czujniki High-country-tek MVP-F Series